The Huck® Range Force™ Battery Tool is a portable powerhouse for multiple applications and industries.
Huck® has joined forces with Makita® to bring you industry-leading performance with an electronically adjustable installation pull force.
Designed for production volume fastening, the 2024 offers a number of outstanding features, including an ergonomically designed handle, plated piston rods and an efficient in-line piston. An extended piston version (2024L) is available and an optional vacuum assist pintail collection system (2024V) can be added.
Designed for production volume fastening, the 2025 offers a number of outstanding features, including an ergonomically designed handle, plated piston rods and an efficient in-line piston. An extended piston version (2025L) is available and an optional vacuum assist pintail collection system (2025V) can be added.
Available only at Applifast, this user-friendly kit includes a pneudraulic tool and nose assemblies that will install each and every fastener used in any heavy truck cab and many trailer applications.
The Model 256 tool is designed for high-speed production applications, able to install up to 20 fasteners per minute. Because it has slightly more swaging power than the Model 255, the 256 is able to install up to 3/8'' steel Magna-Grip fasteners.
The tool provides optimum stroke for one-cycle installations, and features a concentric (inline) pull piston and new front gland design, allowing for easy piston removal.
The 256 is factory-tested for 2000 cycles, ensuring the tool's reliability, and plated piston rods extend seal life, adding to its durability. This proven production tool weighs only 11.1 pounds.
The 256BT Tool is designed for rapid installation of Huck BobTail fasteners. It features optimum stroke for one-cycle installation of fasteners, and minimal moving parts. Comes with standard inline and offset nose assemblies, ranging from 4mm to 10mm.
The Model 2581 replaces the 2580 and is a lightweight tool (only 6.58 pounds) designed for use in a wide range of high-speed production applications using high speed rivets. With only one moving part, the tool provides for increased reliability and requires minimal maintenance. An offset piston design allows the Model 2581 to easily fit in limited clearance applications.
The 2624 is a lightweight ergonomic alternative to the 585 or 586 tool for installing 5/8'' and 16MM diameter Huck lockbolts and blind bolts.
This line of tooling is fully compatible with existing nose assemblies.
Offering durable construction, advanced hydraulics, and safe, ergonomic design, the 3585 installation tool is easy-to-hold and efficient to use. An improved piston and cylinder design promote longer life. In addition, the nose adapter can be removed through the back of the tool for ease of repair. The 3585 is ideal for installation of all -16 (1/2'') to -24 (3/4") pintail-style lockbolts, and can also be used for installation of Bobtail fasteners. Stroke: 1.812”; Weight: 19 lbs.
The Huck 3585PT Hydraulic Installation Tool goes beyond the 3585 by offering the capability to install Huck-Spin and Huck-Spin2 fasteners with a pass-through piston and end cap design. In addition, the 3585PT is fully compatible with Huck BobTail® fasteners. The stroke has been increased to 1.900'' allowing the capacity to install and remove 20mm fasteners.
The Model 940 Powerig® is a portable unit sized for moderate production and repair applications.
This unit features rugged construction for durability in the field, and the choice of 115 or 220 Volt AC power.
The Model 940 includes a handle for easy transport, simple adjustable hydraulic outputs and quick-connect couplers for connecting installation tool hoses.
Contact us for pricing
Portable power source for use with single-acting and double-acting Huck hydraulic tools.
Includes hydraulic quick disconnects and electrical connector compatible with Huck tools.
• 1/4 HP 110/115V 50/60 Hz, Single Phase, 6A
• Pressure adjustable from 1,000 psi (69 bar) to 10,000 psi (690 bar)
• Delivers 10 cu. in./min. hydraulic fluid flow at 10,000 psi
• Usable hydraulic fluid capacity 60 cu. In.
• 68-74 dBa at 10,000 psi (measured at 3 ft. distance, all sides)
• Product weight with oil 20 lbs.
• Overall dimensions 13''L x 7-3/4''W x 10''H
Ideal for repair use and small fabrication work.
HUCK Model BTT35LS is a Hydraulic Installation Tool that installs and removes BOBTAIL fasteners in limited clearance applications.
This tool design consists of a cylinder housing with two chambers to accommodate two tandem pull pistons. This feature increases pull capacity while maintaining optimum centerline-to-edge clearance. This lightweight tool is intended for use with Huck standard industrial POWERIG® Hydraulic Units (models 913H, 918, d 940, and 968) or equivalent, sold separately.
Except for nose assembly, tool is complete with hydraulic hoses, couplings and electric control cord ready to be attached to POWERIG® Hydraulic Units hoses and control cord.